Case – Sanding Composite Parts

 

You can use our Sanding Brushes for sanding your composite parts before painting and also for intermediate sanding between painting and lacquering the parts.

For smaller parts we recommend using our Sand-400 sanding machine with our LiteSand brushes. For bigger parts you would need a Brush Sanding Machine from one of our partners.

Build up of the Sanding solution:

 

Use sanding head. Add brushes matching your requirements. Add head to any machine
or our Sand-400 machine.
 
 
Now you are ready to sand your parts.
 
Advantage of using brushes for the sanding of your parts:
 
 
-          The brushes will also sand edges, profiles, etc as well as the main surface of the composite part.
-          It is very easy to use and require very little training of the person doing the sanding.
-          Equal sanding on the full composite part.
-          Abrasive last longer than traditional methods
 

How does sanding brushes work:

 
The brush is like a hand behind the abrasive. It allows the abrasive to be pushed into profiles, onto edges, etc. Please see picture for illustration
 
 
See more here:
Please take a look at this video for more knowledge on how to operate the machine on the composite part – example is intermediate sanding after filler but before painting of the part.
 
Composite Parts